Tuesday, January 3, 2012

Arduino Synth

To continue my efforts in learning as much as I can about the Arduino Uno board I decided to piece together a small synthesizer as per the Auduino project. Below is a small schematic I put together.

I used a 10 Kilo Ohm potentiometers in series with a 100 ohm resistor. To isolate the amplifier I used an 8 ohm to 1000 ohm audio transformer in series with another 100 ohm resistor to keep things safe.

This is a shot of the setup all hooked up and ready to go. Below is a video of it.

No comments:

Post a Comment